← All Guides

Guide

Bridging Finance for
Property Refurbishment

Buy cheap, do it up, sell or refinance at what it is now worth. How the whole cycle gets funded.

Last updated

7 min read | Updated | RefurbishmentAuction Finance
Discuss your deal Always confidential. No obligation.

The Refurbishment Strategy

There is nothing new in the idea. You buy a property that is worth more than its price once somebody fixes it, you fix it, and you sell or refinance at the higher figure. The difference between what it cost you all in and what it is worth at the end is yours, as profit or as equity. Our light and heavy refurbishment bridging loans fund both the purchase and the works stage.

See it in practice: a mill refurbishment in Manchester.

Bridging is what makes it workable. It is quick enough to buy at auction or from a seller who wants out, and one facility can cover the purchase and the works. Now try asking a high-street bank for a mortgage on a house with no kitchen, with an auction deadline (typically 20 business days) running. Good luck with that.

You make money on these by getting the costings right, giving the works long enough, and knowing from the outset how you get out. The loan is a tool. It is not the plan.

Light vs Heavy Refurbishment

Lenders split refurbishment into light and heavy, and which side of the line you fall decides the rate, the LTV and who will look at the deal at all.

Rates below are the average published rate on 20 November 2026: 0.76% a month for light refurbishment, across 17 lenders, and 0.82% a month for heavy, across 13.
Factor Light Refurb Heavy Refurb
ScopeCosmetic, no structural changesStructural: layout changes, extensions
Typical WorksKitchen, bathroom, decoration, flooringExtensions, conversions, new floors, underpinning
Budget£10,000 – £30,000£50,000+
Planning RequiredRarelyOften (especially conversions)
Monthly Rate0.76% a month (average published, 17 lenders)0.82% a month (average published, 13 lenders)
Max LTV (GDV)Set by the lender; ask for the figure earlySet by the lender; ask for the figure early
DrawdownOften 1-2 draws or upfront3-4+ staged draws with surveyor sign-off

The line is not always clear. A job that is mostly paint and carpets but takes out a non-loadbearing wall? Light to one lender, heavy to the next. A broker worth paying knows which lenders are relaxed about it.

How the Funding Works

One refurbishment bridging loan usually pays for the property and the works. The pieces:

Day 1 Advance

The lender funds the purchase price (up to their LTV limit) on completion. This is the money that actually buys the property. Typically up to 75% of the purchase price. A few lenders will go higher with additional security.

Works Facility

A separate tranche ring-fenced for the refurbishment works. This money isn't released upfront. It's drawn down in stages as work progresses. The total facility (purchase + works) is capped at a percentage of the GDV.

Your Contribution

You need to fund the deposit (the gap between the purchase price and the day 1 advance) plus any works costs above what the lender will fund. On a £400k purchase at 75% LTV, that's £100k deposit plus any shortfall on works.

Interest

Interest is typically rolled up on the full facility amount. You pay interest on the purchase advance from day 1, and on each works drawdown from when it's released. Nothing is paid monthly. The whole lot is settled when you exit.

Drawdown Schedules Explained

The works element of your loan is released in tranches, typically 2 to 4 draws for light refurb, or more for heavy refurb. The process works like this:

The Drawdown Process

  1. You carry out an agreed phase of works using your own funds or the previous drawdown.
  2. You request the next drawdown by notifying the lender's surveyor (known as a monitoring surveyor or QS).
  3. The surveyor inspects the property and confirms the works have been completed to an acceptable standard and in line with the agreed schedule.
  4. The lender releases the next tranche. From the inspection to the money landing is typically 3-5 working days.

Allow £250-500 for each surveyor visit. On a 4-draw schedule, that's £1,000-2,000 in monitoring fees. Some lenders include the first inspection in their arrangement fee.

A common frustration: you need to spend money on works before the drawdown reimburses you. So you need cash of your own to cover the stretch between paying the trades and getting the next tranche. Put it in the cashflow.

Understanding LTV for Refurbishment

There are two LTV measures in refurbishment lending, and you need both to structure the deal:

Day 1 LTV

The loan as a share of the purchase price, or of today's value if you already own it. This sets how much cash you put in on day one. Typically up to 75%. A few lenders will go higher with additional security.

GDV LTV

The total facility (purchase + works + interest) as a percentage of the gross development value, the estimated value after refurbishment. Each lender sets its own cap on total borrowing against the GDV. This is usually the binding constraint.

Going beyond 75% of the purchase price usually means offering additional security, such as a charge over another property you own. With it, a few lenders will go higher, provided the GDV LTV still stays within their limit.

The BRRR Strategy

Buy, Refurbish, Refinance, Rent: BRRR is how most portfolio landlords use bridging. Stage by stage:

1

Buy

Purchase a property below market value using a bridging loan. Auction purchases, repossessions, and tired properties from motivated sellers are the typical sources. Here is what a lender will lend on a BMV purchase.

2

Refurbish

Carry out works to bring the property up to a lettable (or improved) standard. The works add value, closing the gap between purchase price and market value.

3

Refinance

Once works are complete, refinance onto a buy-to-let mortgage at the new, higher valuation. The BTL mortgage repays the bridging loan. If the new valuation is high enough, you pull out most or all of your original capital.

4

Rent

The property is now tenanted, generating rental income that covers the BTL mortgage. Your capital is recycled, ready for the next purchase.

The power of BRRR is capital recycling. If you buy at enough of a discount and add sufficient value through refurbishment, the refinance can release some or all of the capital you put in.

Costs and Typical Rates

Current average published rates for refurbishment bridging:

Rates below are the average published rate on 20 November 2026: 0.76% a month for light refurbishment, across 17 lenders, and 0.82% a month for heavy, across 13.
Cost Light Refurb Heavy Refurb
Monthly Rate0.76% a month (average published, 17 lenders)0.82% a month (average published, 13 lenders)
Arrangement Fee1% – 2%1.5% – 2%
Valuation Fee£500 – £3,000+£500 – £3,000+
Legal Fees (each side)£1,500 – £5,000+£1,500 – £5,000+
Monitoring Fees£250 – £500 per visit£250 – £500 per visit
Our FeeGenerally 1% of the gross loan, due on completionGenerally 1% of the gross loan, due on completion

Use our bridging calculator to model the total cost including all fees and rolled-up interest for your specific deal.

The Exit: Where You Make Your Money

Your exit route determines your entire strategy. The two main options:

Refinance onto BTL Mortgage

The BRRR exit. The BTL mortgage is based on the post-works valuation, so if you've added significant value, the mortgage amount can be high enough to repay the bridge and return most of your capital. BTL rates from 4-6% annual are typical.

Sell at the Uplift

The flip exit. Sell the refurbished property at its improved market value. Your profit is the difference between sale price and total costs (purchase + works + finance costs + buying/selling costs). Budget 3-5% for selling costs.

Whichever route you choose, have it planned before you buy. A lender wants to see a believable exit when you apply, not when the loan is due. Talk to us before you buy, and we will structure the deal properly from day one.

Planning a Refurb?

Send us the purchase price, the works budget and your end value, and we'll show you how the facility and drawdowns would look. We read every enquiry the same working day and usually reply by phone, often within a couple of hours.